No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor UltraPath for vSphere 21.3.0 User Guide 03

This document covers the functions, features, installation, configuration, upgrade, uninstallation, maintenance, troubleshooting, and FAQs of OceanStor UltraPath for vSphere (UltraPath forvSphere). UltraPath for vSphere is the multipathing software developed by HuaweiTechnologies Co., Ltd (Huawei for short). The document aims at helping users to be fully familiar with UltraPath for vSphere and its use.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SAN Boot Environment Requirements

SAN Boot Environment Requirements

This chapter introduces the environment requirements for installing UltraPath when SAN Boot is configured.

If SAN Boot is configured for the host, in addition to doing the above-mentioned work before installing UltraPath, the following requirements must also be met:

  • An operating system (OS) has been installed on the virtual LUN mapped to the host by the Huawei storage system.
  • The virtual LUN running the host operating system must be a common virtual LUN.

In SAN Boot scenarios, do not map the LUN that houses the host's operating system to two or more hosts. Otherwise, operating system data may be inconsistent. Besides, the virtual LUN running the host operating system must be a common virtual LUN.

The procedure for configuring HyperMetro in the SAN Boot scenario is as follows:

  1. Install the operating system on the SAN storage device.
  2. Install UltraPath on the operating system. For details, see 2.3 Installing UltraPath for ESXi.
  3. Configure the HyperMetro feature by referring to related product documentation.

    NOTE:
    • Log in to Huawei technical support website (http://support.huawei.com/enterprise/) and enter BC&DR Solution Product Documentation (Active-Active DCs) in the search box to search for, browse, and download corresponding product documents.
    • For UltraPath V100R008C50 and later versions, use the product documentation of V200R001C20.

Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100052672

Views: 14603

Downloads: 145

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next