No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun Mission Critical Server Oracle Database Oracle 12c R1 (RAC) Best Practice 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing RPM Packages

Installing RPM Packages

Perform the following operations on each database node.

  1. Access the KVM and mount the image file.

  2. Run the following commands to configure the YUM Source:

    cd /etc/yum.repos.d/
    vi /etc/yum.repos.d/yum.repo
    [yum]
    name=yum
    baseurl=file:///mnt
    enabled=1
    gpgcheck=0

  3. Run the following command to mount the image. Change sr0 to the actual device name.

    mount /dev/sr0 /mnt

  4. Install RPM packages.

    Some basic commands cannot be used after the minimum system is installed. Run the following command to install the basic package:

    yum groupinstall base

    After the storage system is connected, install the following RPM package and run the rescan-scsi-bus.sh script to scan for the mapping information required by the multipathing software (if Huawei UltraPath is used, skip this step).

    yum install sg3_utils*

    To use ORAchk, install the following RPM packages:

    yum install perl*
    yum install expect*

    To enable time synchronization, install the following package:

    yum install ntp*

    Install the following packages to provide a GUI for the installation of Oracle Grid Infrastructure and Oracle Database.

    yum install java*
    yum install xdpy*

    During the installation check of Oracle Grid Infrastructure, the following packages need to be installed. If other packages need to be installed during the installation check, mount the images to install them.

    yum install compat*
    yum  install libaio*
    yum  install ksh*
    yum  install gcc*
    yum  install libstdc*
    yum  install nfs-utils*

  5. If the database node OS is RHEL 7, the system displays an alarm indicating that the compat-libstdc++-33-3.2.3 package is missing during the installation of Oracle Grid Infrastructure and Oracle Database. Download the compat-libstdc++-33-3.2.3 package (64-bit) from the official Red Hat website and install the package.

    rpm -ivh compat-libstdc++-33-3.2.3-72.el7.x86_64.rpm

Download
Updated: 2019-02-01

Document ID: EDOC1100053123

Views: 14779

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next