No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Agile Controller EEM V200R010C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the EEM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DCU_103104435 RTC Battery Low Voltage Alarm

DCU_103104435 RTC Battery Low Voltage Alarm


When the RTC battery voltage is lower than 2500 mV, this alarm is generated.


Alarm ID Alarm Severity Alarm Type



Device alarm

Impact on the System

  • Incorrect DCU time is synchronized to electrical meters. As a result, electrical meter data is frozen incorrectly.
  • The DCU clock is not synchronized with that of the main station, which affects the success rate of collection tasks on the main station.

Possible Causes

The RTC battery has aged.


  • Replace the RTC battery.


The system automatically clears the alarm after the fault is rectified.

Updated: 2019-03-07

Document ID: EDOC1100053923

Views: 9072

Downloads: 5

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next