No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Agile Controller EEM V200R010C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the EEM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Meter_103104430 The Mapping Between Slot IDs and IDs of Electrical Meters Is Inconsistent

Meter_103104430 The Mapping Between Slot IDs and IDs of Electrical Meters Is Inconsistent

Description

When a meter is removed from a slot of the modular meter and reinstalled into another slot, the mapping between the slot ID and meter ID is different from that in the profile. In this case, this alarm is generated.

Attribute

Alarm ID Alarm Severity Alarm Type

103104430

Major

Device alarm

Impact on the System

There is no impact on the system.

Possible Causes

  • The meter slot ID changes.

Procedure

  1. None.

Clearing

The alarm must be cleared manually.

Download
Updated: 2019-03-07

Document ID: EDOC1100053923

Views: 8403

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next