No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Agile Controller EEM V200R010C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the EEM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DCP_103104503 DCP Restart

DCP_103104503 DCP Restart

Description

When the DCP restarts, this alarm is generated.

Attribute

Alarm ID Alarm Severity Alarm Type

103104503

Major

Operational alarm

Impact on the System

The DCP service is not affected.

Possible Causes

  • The DCP is restarted manually.
  • The DCP server is powered off and restarts.

Procedure

  1. No action is taken.

Clearing

The alarm needs to be cleared manually.

Download
Updated: 2019-03-07

Document ID: EDOC1100053923

Views: 9028

Downloads: 5

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next