No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Agile Controller EEM V200R010C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the EEM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DCC_103104415 Alarm About Battery Fault

DCC_103104415 Alarm About Battery Fault

Description

The DCC detects battery status every five minutes. This alarm is generated when the battery is charged for over 3.5 hours in fast charging mode.

Attribute

Alarm ID Alarm Severity Alarm Type
103104415 Major Equipment alarm

Impact on the System

The DCC's battery may be damaged, and the battery lifetime will be shortened.

Possible Causes

  • The DCC's battery was charged overtime in fast charging mode.

Procedure

  1. None.

Clearing

The system clears this alarm automatically.

Download
Updated: 2019-03-07

Document ID: EDOC1100053923

Views: 8676

Downloads: 5

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next