No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Agile Controller EEM V200R010C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the EEM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Meter_113104056 Parameter Change Event

Meter_113104056 Parameter Change Event


When parameters such as the rate, standby time zone table, standby time segment table, and special date table are changed, this alarm is generated.


Alarm ID Alarm Severity Alarm Type



Device alarm

Impact on the System

When the service parameters on the device are changed, the platform charging accuracy is affected.

Possible Causes

Device parameters are changed.


  1. Log in to the EEM as the administrator.
  2. Choose Policy > Collection Policy > Collection Task to access the Collection Task page.
  3. Based on the service parameter changes on the live network, modify the corresponding EEM collection task and adjust the charging policy in the service system so that services can be executed properly.


The alarm must be cleared manually.

Updated: 2019-03-07

Document ID: EDOC1100053923

Views: 8649

Downloads: 5

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next