No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Agile Controller EEM V200R010C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the EEM.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Meter_103104442 The Modular Meter Is Installed Incorrectly

Meter_103104442 The Modular Meter Is Installed Incorrectly

Description

When the control unit of the modular meter is not installed into the backplane, this alarm is generated.

Attribute

Alarm ID Alarm Severity Alarm Type

103104442

Minor

Equipment alarm

Impact on the System

The modular meter cannot be connected to the DCU.

Possible Causes

  • The control unit of the modular meter is not installed into the backplane.
  • The hardware of the modular meter fails.

Procedure

  1. Check alarm information and determine information about the modular meter that generates the alarm.
    1. Start the EEM, enter the user name and password, and click Go to log in to the EEM.
    2. Choose Monitoring > Alarm > Current Alarm to access the Current Alarm page, and check the alarm list.
    3. Click next to the alarm. The EEM displays detailed information about the alarm. Check alarm information.
  2. Find the modular meter that generates the alarm and check whether the modular meter is installed correctly.
    • If so, go to 3.
    • If not, install the modular meter correctly.
  3. Check whether the hardware of the modular meter fails.
    • If so, replace the faulty hardware.
    • If not, collect alarm and configuration information, and contact technical support personnel.

Clearing

The system automatically clears the alarm after the fault is rectified.

Download
Updated: 2019-03-07

Document ID: EDOC1100053923

Views: 9929

Downloads: 5

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next