No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Agile Controller EEM V200R010C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the EEM.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DCU_103104413 The Terminal Power Cover Is Opened

DCU_103104413 The Terminal Power Cover Is Opened

Description

When the power cover of the DCU is opened, this alarm is generated.

Attribute

Alarm ID Alarm Severity Alarm Type

103104413

Major

Device alarm

Impact on the System

If the power cover of the DCU is opened by an unauthorized operator, the DCU power has the security risk.

Possible Causes

  • The DCU power cover is opened.
  • The DCU hardware is faulty.

Procedure

  1. Check alarm information and determine information about the DCU that generates the alarm.
    1. Start the EEM, enter the user name and password, and click Go to log in to the EEM.
    2. Choose Monitoring > Alarm > Current Alarm to access the Current Alarm page, and check the alarm list.
    3. Click next to the alarm. The EEM displays detailed information about the alarm. Check alarm information.
  2. Check whether the power cover of the DCU is opened onsite.
    • If so, manually close the power cover of the DCU.
    • If not, go to 3.
  3. Check whether the DCU hardware fails.
    • If so, replace the faulty hardware.
    • If not, collect information during the troubleshooting process and contact Huawei technical support personnel.

Clearing

The system automatically clears the alarm after the fault is rectified.

Download
Updated: 2019-03-07

Document ID: EDOC1100053923

Views: 10045

Downloads: 5

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next