No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Agile Controller EEM V200R010C10 Alarm Handling

This document provides the explanations, causes, and recommended actions of alarms on the EEM.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Meter_103104441 Alarm About High or Low Temperature of the Modular Meter

Meter_103104441 Alarm About High or Low Temperature of the Modular Meter

Description

When the actual temperature of the modular meter is out of the temperature range (-25°C to +88°C), this alarm is generated.

Attribute

Alarm ID Alarm Severity Alarm Type

103104441

Major

Equipment alarm

Impact on the System

The temperature of the modular meter is high or low, causing the damage to the hardware of the modular meter. As a result, the modular meter cannot work properly.

Possible Causes

  • The environment or hardware temperature of the modular meter exceeds the threshold.
  • The temperature sensor of the modular meter is damaged.

Procedure

  1. Check alarm information and determine information about the modular meter that generates the alarm.
    1. Start the EEM, enter the user name and password, and click Go to log in to the EEM.
    2. Choose Monitoring > Alarm > Current Alarm to access the Current Alarm page, and check the alarm list.
    3. Click next to the alarm. The EEM displays detailed information about the alarm. Check alarm information.
  2. Find the modular meter that generates the alarm and check whether the hardware of the modular meter fails.
    • If so, replace the damaged hardware.
    • If not, ensure ventilation and lower the temperature of the environment where the modular meter is located.
  3. If the fault persists, collect information during the troubleshooting process and contact Huawei technical support personnel.

Clearing

The system automatically clears the alarm after the fault is rectified.

Download
Updated: 2019-03-07

Document ID: EDOC1100053923

Views: 10024

Downloads: 5

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next