No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Bar 500 V600R019C00 Maintenance Guide

Describes how to maintain, and troubleshoot the Videoconferencing Endpoint.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Alarms

Checking Alarms

Periodically check whether the endpoint has alarms. If it has alarms, follow the instructions described in the HUAWEI Bar 500, Box 500, Box 700, Box 900, and Board V600R019C00 Alarm Handling to clear them, ensuring that the endpoint runs properly.

Procedure

  1. Log in to the endpoint web interface as the administrator.
  2. Check whether there are alarm notification messages on the web interface.
  3. Find the handling suggestions for alarms in the HUAWEI Bar 500, Box 500, Box 700, Box 900, Board V600R019C00 Alarm Handling by alarm ID and clear the alarms accordingly.
Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100054964

Views: 10152

Downloads: 9

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next