No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Bar 500 V600R019C00 Maintenance Guide

Describes how to maintain, and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring Default Settings Through the RST Button

Restoring Default Settings Through the RST Button

If you forget some user names or passwords and want to restore them to the default values, use the tip of a pen or similar to push the reset pinhole on the rear panel of the endpoint to restore its factory defaults. After the factory reset, all the settings are restored to the default settings.

  • When the endpoint is running, press and hold the RST button for 10s to reset it to factory settings. After you press and hold the RST button for 5s, the system will prompt you that your endpoint will be reset to factory settings if you press and hold this button for 10s.
  • During the startup, press and hold the RST button for 10s to restore the A/B system.
Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100054964

Views: 8042

Downloads: 9

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next