No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI Bar 500 V600R019C00 Maintenance Guide

Describes how to maintain, and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Encryption

Configuring Encryption

You can enable encryption to improve video communication security.


On an IP network that is neither quality-guaranteed nor secure, encryption can be used to increase the video communication security, but may decrease communication efficiency. Both parties involved in communication must support encryption; otherwise, encryption fails. To improve communication security, you are advised to enable encryption.


To configure encryption on the web interface:

To hold encrypted conferences over SIP, set Transmission type to TLS when registering the endpoint with the SIP server to fortify security.

  1. Enable the TLS protocol to support encrypted transmission of SIP signaling.

    1. Log in to the web interface, choose System Settings > Registration > Cloud Service, and set Cloud platform to Manual.
    2. Set Transmission type in SIP parameters to TLS.
    3. Click Save.

  2. Configure the media stream encryption policy.

    1. Choose System Settings > Security > Encryption.
      • None: No stream is encrypted.
      • Forced: Streams are forced to be encrypted. If you select this option, your endpoint can attend encrypted conferences only. To improve communication security, select this option.
      • Auto: The endpoint uses the appropriate encryption policy and algorithm to encrypt streams. Streams are encrypted only when a call is set up. If you select this option for the local site and encryption is disabled at a remote site, the conference between the local and remote sites is not encrypted.
    2. Click Save for the settings to take effect immediately.

Updated: 2019-06-25

Document ID: EDOC1100054964

Views: 8927

Downloads: 9

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next