No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Bar 500 V600R019C00 Maintenance Guide

Describes how to maintain, and troubleshoot the Videoconferencing Endpoint.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Performing Web Access Control

Performing Web Access Control

The endpoint adopts HTTPS mode, which is the secure version of Hypertext Transfer Protocol (HTTP).

With the web access control function, the endpoint:

  • Control the web login permission.

    Go to Settings > Advanced Settings > Web Login on the Touch and set the web login permission.

    • Enable(default): All computers on the same network as the endpoint can access the web interface of the endpoint.
    • Disable public network: No computer on the public network is allowed to access the web interface of the endpoint.
    • Wi-Fi Only: Only the computer that connects to the Wi-Fi hotspot on the endpoint can access the web interface of the endpoint.
  • Allows the user to submit the log out application.

    When you have logged in to the web interface, you can click Exit in the upper right corner. The login interface is displayed.

  • Allows at most 10 users to use the same or different accounts to log in to the web interface concurrently.

If the number of user attempts to log in to the endpoint web interface reaches a predefined number, the user account will be locked and cannot be used for login until the locking duration ends. On the web interface, choose System Settings > Security > Web Login, and set Max unsuccessful attempts and Locking duration.

Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100054964

Views: 10424

Downloads: 10

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next