No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Bar 500 V600R019C00 Maintenance Guide

Describes how to maintain, and troubleshoot the Videoconferencing Endpoint.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Backup and Restoration

Backup and Restoration

Regularly back up the system configuration file of the endpoint and use the backup file to restore the system after an exception occurs.

Background

  • You can use the backup and restoration function to create a backup file for the endpoint.
  • If a configuration backup file is already stored on your endpoint, the new backup configuration file will overwrite the original one.
  • After the restoration is complete, the endpoint will automatically restart. The settings under System Settings will be restored to those contained in the backup configuration file.
  • Before upgrading the endpoint, it is recommended that you back up the settings under System Settings. If the upgrade fails, you can use the backup data to restore the system.
  • If some parameter settings under System Settings are inadvertently deleted or modified, you can use this backup file to restore all the settings.

Backup Settings

  1. Log in to the endpoint web interface as the administrator.
  2. Choose Maintenance > Configuration Management.

    The Configuration Management page is displayed.

  3. Click Back Up Settings.

    The endpoint starts backing up its configuration file. If the backup is complete, a success message will be displayed.

Using the Backup Configuration File to Restore the System

  1. Log in to the endpoint web interface as the administrator.
  2. Choose Maintenance > Configuration Management.

    The Configuration Management page is displayed.

  3. Click Restore Backup Settings.

    The endpoint starts using the backup configuration file to restore the system.

    NOTE:

    After the restoration is complete, the endpoint will automatically restart.

Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100054964

Views: 10419

Downloads: 10

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next