No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Bar 500 V600R019C00 Maintenance Guide

Describes how to maintain, and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Indicator Status

Checking the Indicator Status

By checking the status of indicators on the endpoint's front panel, you can know the endpoint's running status, for example, working properly, sleeping, and working at a high temperature. If any indicator does not perform as expected, tackle the problem in time to ensure proper running of the endpoint.

Checking Indicators on the endpoint

Check the status of indicators on the endpoint by following the instructions described in Table 2-2 and perform maintenance tasks accordingly.

Table 2-2 Indicator status

If the Indicator Is...

The Endpoint Is...

Off

Powered off.

Blinking green twice per second

Powering on.

Blinking green four times per second

Upgrading.

Steady green

Working properly.

Blinking green (on for 1s, off for 2s, fading in and out)

On standby.

Blinking red twice per second

Faulty (hardware).

Blinking red four times per second

Faulty (software).

Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100054964

Views: 8084

Downloads: 9

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next