No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI Bar 500 V600R019C00 Maintenance Guide

Describes how to maintain, and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Password Verification

Enabling Password Verification

To secure your endpoint, it is recommended that you change the login password at the first use and regularly change the password afterward. The new password cannot be the default password or any of the previous five passwords.

When you use the endpoint for the first time, enable password verification to specify whether the default password is changed, whether the password has expired, and whether the new password is the default password or any of the previous five passwords.

  1. Use SSH or Telnet to log in to the endpoint. For details, see Performing SSH Access Control.
  2. Run the mnt debug blevelctrl 1 command and press Enter to enable password verification.

    -> mnt debug blevelctrl 1 
    Set BLevelCtrl Flag = 1 success.

Updated: 2019-06-25

Document ID: EDOC1100054964

Views: 9095

Downloads: 9

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next