No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI Bar 500 V600R019C00 Maintenance Guide

Describes how to maintain, and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Cleanliness

Checking the Cleanliness

If the endpoint runs for a long period of time but is not cleaned, its body, ports, heating vents, and camera lens may be covered with dust. Its performance may be compromised, impacting user experience. Therefore, it is necessary to regularly clean the endpoint and its peripherals, helping extend their lifecycle and improve user experience.

Checking the Endpoint Cleanliness

Check the cleanliness of your endpoint regularly to ensure that it runs properly in a long term and delivers superb conference experience.

Table 2-4 describes the items to be checked. If any of them does not meet the requirement, clean it accordingly.

Table 2-4 Cleanliness items



Built-in camera lens

The built-in camera lens is clean.

Ports and heating vents

The ports and heating vents are clean.

Device body

The device body is clean.

Updated: 2019-06-25

Document ID: EDOC1100054964

Views: 8154

Downloads: 9

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next