No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI Bar 500 V600R019C00 Web Online Help

Web Online Help

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Screen Content Cloning

Configuring Screen Content Cloning

You can set whether to clone screen content for the endpoint on the web interface.

  1. Choose System Settings > Input/Output and click the Clone tab.
  2. Set the parameters for cloning and switching screen content, as shown in Table 1-14.

    Table 1-14  Parameter description




    Clone screen content

    Specifies whether the endpoint enables screen content cloning when the video output port and presentation output port of the endpoint connect to a display.
    • Normal mode: The video and presentation are displayed on two screens.
    • Dual-screen video: The video is displayed on both screens.
    • Dual-screen presentation: The presentation is displayed on both screens.

    The default value is Normal mode.

    If you set this parameter to Dual-screen video or Dual-screen presentation, set Video resolution to the same value for the video output port and presentation output port under System Settings > Input/Output > Video Output.

  3. Click Save.
Updated: 2019-06-25

Document ID: EDOC1100054967

Views: 10158

Downloads: 5

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next