No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI Bar 500 V600R019C00 Web Online Help

Web Online Help

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Video Input

Configuring Video Input

Correct video input settings enable your endpoint to properly display video input from the video input ports.

Background

Table 1-9 show the capabilities of the video input ports.

Table 1-9  Capabilities of the video input ports

Port Name on the UI

Port Number on the Rear Panel

Type

Capability

Description

1 HDMI

1

HDMI

A resolution of up to 4K x 2K 30 fps is supported.

Connects to devices such as a local computer or connects to a camera through a converter cable.

2 VGA

2

VGA

A resolution of up to 1080p 60 fps is supported.

Connects to devices such as a local computer.

Each input port to be used for transmitting a video or a presentation can be specified on the user interface. For details, see section Selecting Video Sources.

Select a video input port on your endpoint based on the video format supported by the camera. Then connect the camera to your endpoint using the cable provided.

Procedure

  1. Choose System Settings > Input/Output and click the Video Input tab.
  2. Set the video input parameters listed in Table 1-10.

    Table 1-10  Video input parameters

    Parameter

    Description

    Setting

    Remote control

    Specifies whether a remote site can control the local camera during a call.

    The default value is Allow.

    Video source management

    Specifies whether a remote site can select the video source of the local endpoint on the camera control interface.

    The default value is Do not allow.

    Selecting an incorrect video source may result in black screens. To avoid mistakenly selecting an incorrect video source, the default value is recommended here.

    Movement speed

    Specifies the movement and zoom speed for the camera at your site.

    • Select Slow for accurate positioning.
    • Select Fast for quick positioning.
    • Select Medium for medium paced positioning.

    This parameter is unavailable for a built-in camera.

    The default value is Medium.

    Initial position

    Specifies the position of the camera after startup.

    • Auto: The camera moves to its initial position after startup.
    • Preset 1: The camera moves to the preset after startup.
    NOTE:

    Each camera preset stores the pan, tilt, and zoom settings of the camera. For how to set presets, see Setting a Camera Preset.

    This parameter is unavailable for a built-in camera.

    The default value is Auto.

    Stretch mode

    Specifies how the endpoint adjusts the input video based on the video encoding format.

    • Stretch: Automatically stretch the video to full screen with an unfixed aspect ratio.
    • No stretch: Automatically stretch the video to full screen with a fixed aspect ratio. Black borders may appear at the edges of the display.

    The default value is No stretch.

    It is recommended that you set this parameter to Stretch.

    Mirroring

    Specifies whether the endpoint displays a reflection of an input video, wherein the right and left sides of the original are reversed.

    • Normal: The input video will not be reversed.
    • Horizontal mirroring: The endpoint displays a reflection of the input video, wherein the right and left sides of the original are reversed like the reflection of something seen in a mirror.

    This parameter is unavailable for a built-in camera.

    The default value is Normal.

  3. Click Save.

    The settings take effect immediately.

Translation
Download
Updated: 2019-06-25

Document ID: EDOC1100054967

Views: 9913

Downloads: 4

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next