No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Commissioning Guide

This is NE40E V800R010C10SPC500 Commissioning Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Commissioning Flow

Commissioning Flow

This section describes the NE40E commissioning flow. Users can know the entire process of NE40E commissioning in site deployment after reading this section.

Figure 2-1 Commissioning flow

Table 2-1 Commissioning procedures
Commissioning Procedure Description

Logging In to the NE40E

Describes how to log in to the NE40E for later commissioning. Three login methods, login by using the console interface, Telnet, or Secure Shell (SSH) are introduced.

Checking the Hardware

Describes how to check power supply, fans, boards, and interfaces to prepare for NE40E commissioning.

Commissioning the Link Layer

Describes how to commission the link layer when the NE40E is connected to other routers or transport devices.

Commissioning Services and Protocols

Describes how to commission services and protocols, especially routing protocols, tunnel services, VPN services, and BFD functions, when the NE40E is connected to other routers or transport devices.

Updated: 2019-01-02

Document ID: EDOC1100055014

Views: 4776

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next