No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Commissioning Guide

This is NE40E V800R010C10SPC500 Commissioning Guide
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Power Status

Checking the Power Status

You need to check whether power modules work properly.



  1. Run the display power command to check the power status.

    <HUAWEI> display power
    No      Present     mode       State                          Num
    16 Yes     DC   Abnormal(Present but no input)          Abnormal(2)/Normal(0)   
    17 Yes     DC   Normal                                  Abnormal(0)/Normal(2)   
    Power monitor cable state:

    If the power modules are properly installed and work normally as shown in the displayed information, go on with the subsequent commissioning.

Commissioning Result

The displayed information may be different in real-world situations. For details, see display power.

Updated: 2019-01-02

Document ID: EDOC1100055014

Views: 4648

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next