No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Commissioning Guide

This is NE40E V800R010C10SPC500 Commissioning Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Software Version

Checking the Software Version

You need to check whether the used software version meets deployment requirements.

Prerequisites

Procedure

  1. Run the display version [ slot slot-id ] command to view the version information.

    <HUAWEI> display version
    Huawei Versatile Routing Platform Software
    VRP (R) software, Version 8.180 (NE40E V800R010C10)
    Copyright (C) 2012-2013 Huawei Technologies Co., Ltd.
    HUAWEI NE40E-X16 uptime is 0 day, 1 hour, 2 minutes
    Patch Version: V800R010C10SPH001
    
    NE40E-X16 version information:
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    BKP  version information:
      PCB         Version : CR56BKP16B REV C
      MPU  Slot  Quantity : 2
      SRU  Slot  Quantity : 0
      SFU  Slot  Quantity : 4
      LPU  Slot  Quantity : 16
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    MPU version information:
    
    MPU (Slave) 17 : uptime is 0 day, 0 hour, 53 minutes
      StartupTime 2013/08/09   16:43:54
      SDRAM Memory Size   : 2048 M bytes
      FLASH Memory Size   : 32 M bytes
      NVRAM Memory Size   : 4096 K bytes
      CFCARD Memory Size  : 2048 M bytes
      MPU CR5D0MPUB460 version information
      PCB         Version : CR56RPUA REV B
      EPLD        Version : 104
      FPGA        Version : 001
      MADA version information
      PCB         Version : CR56MADA REV A
      FPGA        Version : 108
      BootROM     Version : 06.06
      BootLoad    Version : 06.06
      MonitorBUS version information:
      Software    Version : 7.47
    
    MPU (Master) 18 : uptime is 0 day, 0 hour, 53 minutes
      StartupTime 2013/08/09   16:44:16
      SDRAM Memory Size   : 2048 M bytes
      FLASH Memory Size   : 32 M bytes
      NVRAM Memory Size   : 4096 K bytes
      CFCARD Memory Size  : 2048 M bytes
      MPU CR5D0MPUB460 version information
      PCB         Version : CR56RPUA REV B
      EPLD        Version : 104
      FPGA        Version : 001
      MADA version information
      PCB         Version : CR56MADA REV A
      FPGA        Version : 108
      BootROM     Version : 06.06
      BootLoad    Version : 06.06
      MonitorBUS version information:
      Software    Version : 7.47
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    LPU version information:
    
    LPU 1 : uptime is 0 day, 0 hour, 46 minutes
      StartupTime 2013/08/09   16:50:58
      Host processor :
      SDRAM Memory Size   : 4096 M bytes
      Flash Memory Size   : 128 M bytes
      LPU CR5DLPUFB070 version information:
      PCB Version         : CR57LPUF120A REV A
      EPLD Version        : 100
      FPGA Version        : 100
      NP Version          : 100
      TM  Version         : 110
      BootROM Version     : 06.07
      BootLoad Version    : 06.07
      NSE version information:
      PCB Version         : NSE REV A
      PIC1 CR57L6XF0 version information:
      StartupTime         : 2013/08/09    16:51:25
      PCB Version         : CR57L6XFB REV A
      FPGA Version        : 101
      CMAC Version        : 110
      BOM Version         : 000
      MonitorBUS version information:
      Software Version : 10.34
    
    LPU 2 : uptime is 0 day, 0 hour, 45 minutes
      StartupTime 2013/08/09   16:52:35
      Host processor :
      SDRAM Memory Size   : 4096 M bytes
      Flash Memory Size   : 128 M bytes
      LPU CR5DLPUFB070 version information:
      PCB Version         : CR57LPUF120A REV A
      EPLD Version        : 100
      FPGA Version        : 100
      NP Version          : 100
      TM  Version         : 110
      BootROM Version     : 06.07
      BootLoad Version    : 06.07
      NSE version information:
      PCB Version         : NSE REV A
      PIC1 CR57EFGFB2 version information:
      StartupTime         : 2013/08/09    16:53:03
      PCB Version         : CR57EFGFB REV A
      FPGA Version        : 102
      CMAC Version        : 110
      BOM Version         : 000
      MonitorBUS version information:
      Software Version : 10.34
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    SFU version information:
    
    SFU 20 : uptime is 0 day, 0 hour, 52 minutes
      StartupTime 2013/08/09   16:45:15
      SDRAM Memory Size   : 256 M bytes
      Flash Memory Size   : 64 M bytes
      SFU CR5DSFUIE07B version information:
      PCB         Version : CR57SFU200B REV A
      EPLD        Version : 101
      BootROM     Version : 05.24
      BootLoad    Version : 05.24
      MonitorBUS version information:
      Software Version : 6.40
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    FAN version information:
    
    FAN 27 MonitorBUS version information:
      PCB      Version : CR52FCBE REV A
      Software Version : 1.7
    
    FAN 28 MonitorBUS version information:
      PCB      Version : CR52FCBE REV A
      Software Version : 1.7
    
    FAN 29 MonitorBUS version information:
      PCB      Version : CR52FCBE REV A
      Software Version : 1.7
    
    FAN 30 MonitorBUS version information:
      PCB      Version : CR52FCBE REV A
      Software Version : 1.7

    If the version displayed in boldface in the preceding information on the NE40E is consistent with the version required for deployment, go on with the subsequent commissioning.

  2. Run the display startup command to view the system software and configuration files for the current and next startup.

    <HUAWEI> display startup
    MainBoard                               :
      Configured startup system software    : V800R010C10.cc
      Startup system software               : V800R010C10.cc
      Next startup system software          : V800R010C10.cc
      Startup saved-configuration file      : cfcard:/v1.cfg
      Next startup saved-configuration file : cfcard:/v2.cfg
      Startup paf file                      : default 
      Next startup paf file                 : default 
      Startup patch package                 : NULL
      Next startup patch package            : NULL
    SlaveBoard                              :
      Configured startup system software    : V800R010C10.cc
      Startup system software               : V800R010C10.cc
      Next startup system software          : V800R010C10.cc
      Startup saved-configuration file      : cfcard:/v1.cfg
      Next startup saved-configuration file : cfcard:/v2.cfg
      Startup paf file                      : default 
      Next startup paf file                 : default 
      Startup patch package                 : NULL
      Next startup patch package            : NULL

    If the names of system software and configuration files, displayed in boldface in the preceding information, for the next startup are consistent with that required for deployment, go on with the subsequent commissioning.

Troubleshooting

If the software version does not meet the deployment requirement, it needs to be upgraded.

NOTE:
Before upgrade, use either of the following methods to view or download the reference product document or system software:
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055014

Views: 4782

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next