No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Commissioning Guide

This is NE40E V800R010C10SPC500 Commissioning Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking System Time

Checking System Time

You need to check system time to ensure that the NE40E works with other devices coordinately.

Prerequisites

Procedure

  1. Run the display clock command to view system time.

    <HUAWEI> display clock
    2010-07-20 10:04:21+08:00
    Tuesday
    Time Zone(BJ) : UTC+08:00
    

    If the system time and time zone displayed in boldface in the displayed information are consistent with the local time and time zone, go on with the subsequent commissioning.

Troubleshooting

If the system time and time zone displayed in the display clock command output are inconsistent with the local time and time zone, follow the procedure below to reconfigure the system time:

  1. Run the clock datetime HH:MM:SS YYYY-MM-DD command in the user view to set the current date and Universal Time Coordinated (UTC).
  2. Run the clock timezone time-zone-name { add | minus } offset command in the system view or user view to set the local time zone based on an offset. (The NE40E obtains the current system time by subtracting an offset from or adding an offset to the UTC.)
  3. (Optional) Run the clock daylight-saving-time time-zone-name repeating start-time { { first | second | third | fourth | last } weekday month | start-date } end-time { { first | second | third | fourth | last } weekday month | end-date } offset [ start-year [ end-year ] ] command in the system view to set the daylight saving time.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055014

Views: 5526

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next