No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Commissioning Guide

This is NE40E V800R010C10SPC500 Commissioning Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Fan Status

Checking the Fan Status

This section describes how to check whether fans function properly. By default, fans work in auto adjusting mode. When the ambient temperature rises sharply, you can manually set it to full speed mode to protect the device.

Prerequisites

The NE40E has been logged in to. For more information, see Logging In to the NE40E.

Procedure

  1. Run the display fan command to check the fan status.

    <HUAWEI> display fan
    Slotid    : 18                                                                  
    Present   : YES                                                                 
    Registered: YES                                                                 
    Status    : MANUAL                                                              
    FanSpeed  : [No.]Speed                                                          
      [1]100%                                                                       
    Slotid    : 19                                                                  
    Present   : YES                                                                 
    Registered: YES                                                                 
    Status    : MANUAL                                                              
    FanSpeed  : [No.]Speed                                                          
      [1]100%   

    If fan modules are properly installed and successfully registered, as shown in the displayed information, go on with the subsequent commissioning.

Commissioning Result

The displayed information may be different in real-world situations. For more information, see display fan.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055014

Views: 4779

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next