No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting MBGP Connections

Resetting MBGP Connections

Resetting MBGP connections tears down peer relationships.

Context

MBGP peer relationships between routers are torn down if you reset MBGP connections by using the reset bgp multicast command. Exercise caution when resetting MBGP connections.

Procedure

  • To reset the MBGP connection between specified peers, run the reset bgp multicast peer-address command in the user view.
  • To reset all MBGP connections, run the reset bgp multicast all command in the user view.
  • To reset the MBGP connections between all peers in a peer group, run the reset bgp multicast group group-name command in the user view.
  • To reset external connections, run the reset bgp multicast external command in the user view.
  • To reset internal connections, run the reset bgp multicast internal command in the user view.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39461

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next