No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Interfaces to VLANs

Adding Interfaces to VLANs

After associating a multicast VLAN with specified user VLANs, add a network-side interface to the multicast VLAN and add user-side interfaces to the user VLANs.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Add the network-side interface to the multicast VLAN using the trunk or hybrid technique.
  3. Add the user-side interfaces to the user VLANs using the trunk or hybrid technique.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39515

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next