No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling IPv6 Multicast Routing

Enabling IPv6 Multicast Routing

Enable IPv6 multicast routing on a router before you configure other IPv6 multicast features on the router.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run multicast ipv6 routing-enable

    IPv6 multicast routing is enabled.

    Running the undo multicast ipv6 routing-enable command will delete all IPv6 multicast configurations and interrupt running IPv6 multicast services. If you want to restore the IPv6 multicast services, re-configure multicast commands for which configurations have been deleted.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 43219

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next