No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Global Anycast-RP

Configuring the Global Anycast-RP

On several devices to be deployed with the Anycast-Rendezvous Point (RP) in a PIM-SM domain, configure the address of the RP elected in the PIM-SM domain as the Anycast-RP address.

Context

NOTE:

Either static or dynamic RPs can be used on the network. Configuring RPs on loopback interfaces is recommended. Configure the same RP address on the routers to be deployed with the Anycast-RP.

Perform the following steps on the routers in a PIM-SM domain to be deployed with the Anycast-RP:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run pim-ipv6

    The PIM-IPv6 view is displayed.

  3. Run anycast-rp rp-address

    The Anycast-RP is configured and the IPv6 Anycast-RP view is displayed.

    NOTE:

    In the Anycast-RP, several RPs need to use the same IP address. Configure the Anycast-RP address on loopback interfaces. The Anycast-RP address must be the same as that of RPs on the network.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 42693

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next