No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Maximum Number of Invalid IPv6 Layer 2 Multicast Protocol Packets That Can Be Stored

Setting the Maximum Number of Invalid IPv6 Layer 2 Multicast Protocol Packets That Can Be Stored

Set the maximum number of invalid IPv6 Layer 2 multicast protocol packets that can be stored. Then, you can effectively locate and rectify faults based on the information about the limited number of invalid messages.

Usage Scenario

If forwarding entries cannot be created on a multicast network, set the maximum number of invalid IPv6 Layer 2 multicast protocol messages that can be stored. Then, you can effectively locate and rectify faults based on statistics and detailed information about invalid Layer 2 multicast protocol messages.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run l2-multicast invalid-packet mld snooping max-count max-number

    The maximum number of invalid IPv6 Layer 2 multicast protocol messages that can be stored is specified.

  3. Run commit

    The configuration is committed.

Checking the Configurations

Run the display current-configuration | include l2-multicast invalid-packet mld-snooping command to check the maximum number of invalid IPv6 Layer 2 multicast protocol messages that can be stored.

<HUAWEI> display current-configuration | include l2-multicast invalid-packet mld-snooping
 l2-multicast invalid-packet mld max-count 20
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40785

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next