No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Establishing BGP MVPN Peer Relationships

Establishing BGP MVPN Peer Relationships

Establish BGP multicast virtual private network (MVPN) peer relationships, allowing provider edges (PEs) on the same MVPN to exchange Auto-Discovery (A-D) and C-multicast routes through BGP.

Context

To enable PEs on the same MVPN to exchange A-D and C-multicast routes, enable each PE to discover the other PEs on the same MVPN. Peer discovery is implemented automatically through BGP, and therefore the process is called automatic discovery. To implement automatic discovery, BGP defined the BGP-MVPN address family.

In intra-AS segmented next generation MVPN (NG MVPN), to transmit multicast data traffic from multicast sources to multicast receivers, all PEs must establish BGP MVPN peer relationships with ABRs.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bgp { as-number-plain | as-number-dot }

    The BGP view is displayed.

  3. Run ipv4-family mvpn

    The BGP-MVPN address family view is displayed.

  4. Run peer { ipv4-address | group-name } enable

    The device is enabled to exchange BGP route information with a specified MVPN peer or peer group.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 44078

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next