No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Multicast over P2MP TE Tunnels

Verifying the Configuration of Multicast over P2MP TE Tunnels

After configuring multicast over point-to-multipoint (P2MP) traffic engineering (TE) tunnels, verify the configuration.

Prerequisites

The multicast over a P2MP TE tunnels configuration is complete.

Procedure

  • Run the display pim [ vpn-instance vpn-instance-name | all-instance ] rp-info command to check information about the PIM routing table.

Example

Run the display pim [ vpn-instance vpn-instance-name | all-instance ] rp-info command on all the devices deployed with the Anycast-Rendezvous Point (RP) to view whether their RP information is consistent.

<HUAWEI> display pim rp-info
 VPN-Instance: public net
 PIM-SM BSR RP Number:1
 Group/MaskLen: 224.0.0.0/4
     RP: 1.1.1.1 (local)
     Priority: 0
     Uptime: 00:45:19
     Expires: 00:02:11

If RP information is consistent on all the devices deployed with the Anycast-RP, for example, RP: 1.1.1.1 (local) is displayed, the Anycast-RP is successfully configured.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39793

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next