No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Uniform Report/Leave Message Transmission

Configuring Uniform Report/Leave Message Transmission

Configuring a uniform Report/Leave message transmission on a Layer 2 device reduces network bandwidth consumption.

Context

If uniform Report/Leave message transmission is not enabled on a network with a large number of user hosts, redundant IGMP packets consume lots of network bandwidth resources. After receiving an IGMP Query message for a multicast group from an upstream device, a Layer 2 device enabled with uniform Report/Leave message transmission replies with only one IGMP Report message, regardless of how many hosts want to join the multicast group. This configuration effectively reduces network bandwidth consumption.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Perform either of the following operations to select VLAN or VPLS networking:

    • Run the vlan vlan-id command to enter the VLAN view.
    • Run the vsi vsi-name [ static ] command to enter the VSI view.

  3. Run igmp-snooping proxy

    IGMP Snooping Proxy is enabled.

    IGMP Snooping Proxy includes the querier and uniform Report/Leave message transmission functions. The querier function enables the device to send IGMP Query messages for its upstream device, and the uniform Report/Leave message transmission function enables the device to represent directly attached hosts to send IGMP Report/Leave messages.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40788

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next