No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting a Minimum TTL Value for IPv6 Multicast Packets

Setting a Minimum TTL Value for IPv6 Multicast Packets

Multicast data for each multicast group on an IPv6 network needs to be transmitted in a certain range. You can control the IPv6 multicast forwarding range by setting a minimum TTL value for IPv6 multicast packets.


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The IPv6 PIM interface view is displayed.

  3. Run multicast ipv6 minimum-ttl ttl-value

    A minimum TTL value is set for IPv6 multicast packets.

  4. Run commit

    The configuration is committed.

Checking the Configurations

Run the display multicast ipv6 minimum-ttl [ interface-type interface-number ] command to check the set minimum TTL value of IPv6 multicast packets that an interface is allowed to send.

Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40475

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next