No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MLD Snooping Configuration

Verifying the MLD Snooping Configuration

After configuring MLD snooping, verify the configuration, including the information about the MLD snooping status, router interfaces, multicast group member interfaces, forwarding table, and querier.

Prerequisites

MLD snooping has been configured.

Procedure

  • Run the display mld-snooping [ vlan [ vlan-id ] ] [ configuration ] command to check the MLD snooping configurations of a specific or all VLANs.
  • Run the display mld-snooping [vsi [ vsi-name ] ] [ configuration ] command to check the MLD snooping configurations of a specific or all VSIs.
  • Run the display mld-snooping router-port { vlan vlan-id | vsi vsi-name } command to check the router interface information of a specific VLAN/VSI.
  • Run the display mld-snooping port-info [ vlan vlan-id [ group-address group-address ] | vsi vsi-name [ group-address group-address ] ] [ verbose ] command to check the interface information of a specific or all VLANs/VSIs.

Example

Run the display mld-snooping [ vlan [ vlan-id ] ] [ configuration ] command to view the MLD snooping configurations of VLAN 10.

<HUAWEI> display mld-snooping vlan 10 configuration
MLD Snooping Configuration for Vlan 10
     mld-snooping enable
     mld-snooping lastmember-queryinterval 5
     mld-snooping max-response-time 6
     mld-snooping group-policy 2001 2
Run the display mld-snooping vsi vsi-name configuration command to view the MLD snooping configurations of a specific VSI.
<HUAWEI> display mld-snooping vsi v123 configuration
 MLD Snooping Configuration for Vsi v123
     mld-snooping enable
     mld-snooping version 1
     mld-snooping query-interval 200
     mld-snooping router-aging-time 300

Run the display mld-snooping port-info [ vlan vlan-id [ group-address ipv6-group-address ] | vsi vsi-name[ group-address group-address ] ] [ verbose ] command to check the multicast group member interface information.

<HUAWEI> display mld-snooping port-info slot 1
 --------------------------------------------------------------------------------------
  Flag: S:Static     D:Dynamic     M:Ssm-mapping
        A:Active     P:Protocol    T:Trill
(Source, Group)                       Port                                         Flag
 --------------------------------------------------------------------------------------
 VLAN 10, 1 Entry(s)
(*, FF16::1)                                                                       P--
                                                                          S--
                                                        1 port(s) include
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39811

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next