No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Layer 2 SSM Mapping Configuration

Verifying the Layer 2 SSM Mapping Configuration

After configuring Layer 2 SSM mapping, verify mappings between multicast group addresses and multicast source addresses to verify that the Layer 2 SSM mapping configurations are complete.

Prerequisites

The Layer 2 SSM mapping configurations are complete.

Procedure

  • Run the display igmp-snooping port-info command to check interface entry information.

Example

Run the display igmp-snooping port-info command to view interface entry information. For example:

<HUAWEI> display igmp-snooping port-info
 -----------------------------------------------------------------------------------
  Flag: S:Static     D:Dynamic     M:Ssm-mapping
        A:Active     P:Protocol    F:Fast-channel                                
                    (Source, Group)  Port                                      Flag
 -------------------------------------------------------------------------------
 VLAN 10, 3 Entry(s)
               (10.1.1.2, 224.1.1.1)                                        P--
                                      GigabitEthernet1/0/0                  --M
                                                        1 port(s) include
               (10.1.1.3, 224.1.1.1)                                        P--
                                      GigabitEthernet1/0/0                  --M
                                                        1 port(s) include
               (10.1.1.4, 224.1.1.1)                                        P--
                                      GigabitEthernet1/0/0                  --M
                                                        1 port(s) include
 -------------------------------------------------------------------------------
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 43957

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next