No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of MBGP Route Advertisement

Verifying the Configuration of MBGP Route Advertisement

After configuring MBGP route advertisement, verify MBGP routing information.

Prerequisites

The policy for controlling MBGP route advertisement has been configured.

Procedure

  • Run the display bgp multicast routing-table community [ aa:nn ] [ no-advertise | no-export | no-export-subconfed ] * & <1-33> [ whole-match ] command to check routes that carry the specified MBGP community attribute.
  • Run the display bgp multicast routing-table community-filter { { community-filter-name | basic-community-filter-number } [ whole-match ] | advanced-community-filter-number } command to check the routes that match the MBGP community filter.
  • Run the display bgp multicast network command to check routing information advertised by MBGP.
  • Run the display bgp multicast routing-table command to check the MBGP routing table.
  • Run the display bgp multicast routing-table cidr command to check Classless InterDomain Routing (CIDR) information.
  • Run the display bgp multicast routing-table statistics command to check statistics about entries in the MBGP routing table.

Example

# Run the display bgp multicast network command. The command output shows routing information advertised by MBGP.

<HUAWEI> display bgp multicast network
  BGP Local Router ID is 2.2.2.9                                                
  Local AS Number is 100(Multicast)                                             
  Network          Mask            Route-policy                                 
                                                                                
  10.1.1.1         255.255.255.0                                              
  10.2.2.2         255.255.255.0                                              
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39405

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next