No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an IPv6 Multicast Forwarding Boundary

Configuring an IPv6 Multicast Forwarding Boundary

After an interface is configured with a forwarding boundary for a specific group, the interface does not forward or receive any IPv6 multicast packet for this group.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The IPv6 PIM interface view is displayed.

  3. Run multicast ipv6 boundary ipv6-group-address ipv6-group-mask-length

    An IPv6 multicast forwarding boundary is configured.

  4. Run commit

    The configuration is committed.

Checking the Configurations

Run the display multicast ipv6 boundary [ ipv6-group-address [ ipv6-group-mask-length ] ] [ interface interface-type interface-number ] command to check information about the multicast boundaries configured on all the interfaces of a device.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39821

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next