No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Layer 2 Multicast

Licensing Requirements and Limitations for Layer 2 Multicast

Licensing Requirements

This feature is a basic feature and is not under license control.

Restrictions and Guidelines

Restrictions

Guidelines

Impact

MLD snooping does not support BDs.

None

MLD snooping cannot be deployed.

MLD snooping does not support multicast VLANs.

None

MLD snooping cannot be deployed.

MLD snooping does not support Layer 2 multicast instances.

None

MLD snooping cannot be deployed.

MLD snooping does not support Layer 2 multicast CAC.

None

MLD snooping cannot be deployed.

MLD snooping does not support virtual access.

None

MLD snooping cannot be deployed.

MLD snooping does not support BGP-AD VPLS over P2MP-TE or mLDP scenarios.

None

MLD snooping cannot be deployed.

MLD snooping does not support PBB VPLS.

None

MLD snooping cannot be deployed.

MLD snooping does not support Kompella VPLS.

None

MLD snooping cannot be deployed.

MLD snooping does not support VPLS PW redundancy.

None

VPLS PW redundancy does not take effect, and rapid switchover is not supporting.

MLD snooping does not support multicast HQoS.

None

Multicast HQoS does not take effect.

VSI Layer 2 multicast CAC in lossy mode supports only trunk dot1q termination sub-interfaces.

None

The feature cannot be deployed.

The function to limit the bandwidth of Layer 2 multicast trunk member interfaces can be configured on the AC side, not PW side, in Layer 2 multicast over VPLS scenarios.

(Eth-Trunk sub-interface view:l2-multicast per-trunk-member limit bandwidth)

None

The function to limit the bandwidth of Layer 2 multicast trunk member interfaces cannot be configured on the PW side.

The Layer 2 multicast instance, user instance, and multicast trunk load-balancing configurations are mutually exclusive.

None

Services cannot be deployed.

  • Layer 2 multicast instances support VLANs and VSIs, but do not support BDs. Only Martini and BGP-AD types of VSIs are supported. The BD type of VSI is not supported.
  • In VPLS over P2MP scenarios, leaf nodes and BUD nodes are supported, but ingress nodes are not supported. This feature is mutually exclusive with IGMP snooping.

None

Services cannot be deployed.

Layer 2 multicast instances support virtual clusters, but do not support virtual access.

None

Services cannot be deployed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40718

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next