No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling MBGP Route Advertisement

Controlling MBGP Route Advertisement

MBGP can filter or apply routing policies to the routes to be advertised to a peer or peer group.

Usage Scenario

To exchange routing information between devices, MBGP advertises routes to peers based on network planning. MBGP can filter or apply routing policies to the routes to be advertised to a peer or peer group.

Pre-configuration Tasks

Before controlling MBGP route advertisement, configure an MBGP peer.

Configuration Procedures

Perform one or more of the following configurations as required.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 43206

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next