No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Preferences for MBGP Routes

Configuring Preferences for MBGP Routes

To control route selection among MBGP and other routing protocols, set the MBGP preference.

Context

Perform the following steps on the router that is configured as an MBGP peer:

NOTE:

This configuration is optional. By default, the default preferences of EBGP routes, IBGP routes, and local routes are all 255.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bgp as-number

    The BGP view is displayed.

  3. Run ipv4-family multicast

    The BGP-IPv4 multicast address family view is displayed.

  4. Run preference { external-preference internal-preference local-preference | route-policy route-policy-name | route-filter route-filter-name }

    MBGP preferences are set for internal, external, and local routes.

    • external-preference: specifies the preference for routes learned from EBGP peers.

    • internal-preference: specifies the preference for routes learned from IBGP peers.

    • local-preference: specifies the preference for locally originated routes.

    • route-policy route-policy-name: specifies a routing policy. The specified MBGP preference will be applied to the routes that match the policy.

    • route-filter route-filter-name: specifies a routing filter. The specified MBGP preference will be applied to the routes that match the policy.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 38963

Downloads: 96

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next