No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Ending an MSDP Peer Connection

Ending an MSDP Peer Connection

After the connection between MSDP peers is ended, the MSDP peers no longer exchange Source Active (SA) messages and do not retry to set up a new connection. You can reestablish the connection between MSDP peers as required.


  1. Run system-view

    The system view is displayed.

  2. Run msdp [ vpn-instance vpn-instance-name ]

    The MSDP view is displayed.

  3. Run shutdown peer-address

    The connection to the remote MSDP peer is ended.

    peer-address: specifies the IP address of a remote MSDP peer.

    Ending the connection does not delete the connection configurations. To reestablish the TCP connection, run the undo shutdown peer-address command.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 43102

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next