No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling IPv6 Multicast Services to Run in a Multicast Topology Instance

Enabling IPv6 Multicast Services to Run in a Multicast Topology Instance

Using a multicast topology instance for IPv6 multicast services applies to both PIM-SM intra-domain and inter-domain scenarios.

Context

NOTE:

Before enabling IPv6 multicast services to run in a specified multicast topology instance, you must configure the multicast topology instance in the system view.

For configuration details, see Configuring IPv6 Multi-Topologies. Make sure that topology-name is multicast.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run multicast ipv6 rpf multi-topology

    IPv6 multicast services are enabled to run in a multicast topology instance.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39389

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next