No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of IPv6 NG MVPN

Overview of IPv6 NG MVPN

An IPv6 NG MVPN is similar with the IPv4 NG MVPN whose framework is designed to transmit IP multicast traffic across a BGP/MPLS IP VPN. An NG MVPN uses BGP to transmit signaling information, and uses PIM-SM, PIM-SSM, P2MP TE, or mLDP to transmit data. The NG MVPN enables unicast and multicast services to be delivered using the same VPN architecture.

The mainly difference between IPv6 NG MVPN and the IPv4 NG MVPN is the IP version and multicast protocols used in the receiver side and source side. For an IPv6 NG MVPN network, IPv6 address is used in the multicast source private network and multicast receiver side private network.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39420

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next