Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Controllable Multicast on the BAS Interface
After controllable multicast is enabled on an interface, the interface controls the users' rights to access the multicast groups based on multicast configurations in the AAA view.
Context
Perform the following steps on the router:
NOTE: Before enabling controllable multicast on the interface, you must enable IGMP.
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- Run bas
The bas interface is created.
- Run quit
Return to the interface view.
- Run igmp enable
IGMP is enabled on the interface.
- Run multicast authorization-enable
Controllable multicast is enabled.
After controllable multicast is enabled on the interface, the interface controls the authorities of users to join related multicast groups according to the configuration of multicast services in the AAA view.
Previous
