No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying the Multicast Profile in a Domain

Applying the Multicast Profile in a Domain

After a multicast profile is bound to a domain, the users in this domain have the rights to access the multicast lists bound to the multicast profile.

Context

Perform the following steps on the router:

Choose one of the following configurations as required:

  • Binding a multicast profile to a domain on an IPv4 network
  • Binding a multicast profile to a domain on an IPv6 network

Procedure

  • Binding a multicast profile to a domain on an IPv4 network
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run domain domain-name

      The domain view is displayed.

    4. Run multicast-profile profile-name

      An IPv4 multicast profile is bound to the domain.

      After a multicast profile is bound to a domain, the users in this domain have the rights to access the multicast lists bound to the multicast profile. One domain can use only one multicast profile. If multiple multicast profiles are bound to the domain, the latest binding takes effect.

  • Binding a multicast profile to a domain on an IPv6 network
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run domain domain-name

      The domain view is displayed.

    4. Run multicast-profile ipv6 profile-name

      An IPv6 multicast profile is bound to the domain.

      After a multicast profile is bound to a domain, the users in this domain have the rights to access the multicast lists bound to the multicast profile. One domain can use only one multicast profile. If multiple multicast profiles are bound to the domain, the latest binding takes effect.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 39331

Downloads: 96

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next