No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Multicast Services to Run in a Unicast Topology Instance

Enabling Multicast Services to Run in a Unicast Topology Instance

Using a unicast topology instance for multicast services applies only to the PIM-SM intra-domain scenario.



Before enabling multicast services to run in a specified unicast topology instance, you must configure a multicast topology instance and a unicast topology instance in the system view.

For the configuration details, see Configuring IPv4 Multi-topology. Ensure that one of the topology names is multicast.


  1. Run system-view

    The system view is displayed.

  2. Run multicast rpf multi-topology

    The multicast multi-topologies view of the public network instance is displayed.

  3. Run apply topology topology-name

    Multicast services are enabled to run in a unicast topology instance.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 42652

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next