No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring PIM over L2TP

Configuring PIM over L2TP

PIM over L2TP allows users to access multicast services over an L2TP tunnel.

Usage Scenario

When a multicast service provider needs to provide multicast services for users through a third-party network, L2TP can be used to carry multicast services. To control the multicast traffic carried by L2TP, you can configure PIM over L2TP to implement multicast user authentication and accounting.


Before configuring PIM over L2TP, complete the following tasks:

  • Configure a unicast routing protocol to ensure that devices are reachable.

  • Set up an L2TP tunnel between the LAC and the LNS.


  1. Run system-view

    The system view is displayed.

  2. Run interface virtual-template vt-number

    The VT interface view is displayed.

  3. Run pim sm

    PIM-SM is enabled.

  4. Run multicast copy by-session

    Multicast replication by session is enabled on the VT interface.

  5. Run pim snooping enable (virtual template interface view)

    PIM over L2TP is enabled on the VT interface.

  6. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40398

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next