No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting IGMP Group Information

Deleting IGMP Group Information

If IGMP group information is unnecessary, delete it in the user view.

Context

The reset igmp group command deletes information about the IGMP groups that an interface dynamically joins, which may cause receivers to fail to receive multicast data. Exercise caution when running this command.

Procedure

  • To delete information about the IGMP groups that an interface dynamically joins, run the following commands in the user view.

    • reset igmp [ vpn-instance vpn-instance-name | all-instance ] group { all | interface interface-type interface-number { all | group-address [ mask { group-mask | group-mask-length } ] [ source-address [ mask { source-mask | source-mask-length } ] ] } }

    • reset igmp [ vpn-instance vpn-instance-name | all-instance ] group ssm-mapping { all | interface interface-type interface-number { all | group-address [ mask { group-mask | group-mask-length } ] } }

  • To delete information about the IGMP groups that an interface statically joins, run the undo igmp static-group { all | group-address [ inc-step-mask { group-mask | group-mask-length } number group-number ] [ source source-address ] } command in the interface view.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 42660

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next