No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - IP Multicast 01

This is NE40E V800R010C10SPC500 Configuration Guide - IP Multicast
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Inter-AS MSDP Peers for BGP Peers

Configuring Inter-AS MSDP Peers for BGP Peers

To enable PIM-SM domains in different ASs to share multicast source information, configure an MSDP peer relationship between Rendezvous Points (RPs) in different ASs in which a BGP peer relationship is set up.

Context

Establish a BGP peer relationship between the RPs in different ASs and then perform the following steps:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run msdp [ vpn-instance vpn-instance-name ]

    The MSDP view is displayed.

  3. Run peer peer-address connect-interface interface-type interface-number

    An MSDP peer connection is set up.

    • peer-address: specifies the IP address of a remote MSDP peer. The address is the same as that of the remote BGP peer.

    • interface-type interface-number: specifies the local interface connected with the remote MSDP peer. This interface is the local BGP peer interface.

  4. (Optional) Run peer peer-address description text

    A description is added for the remote MSDP peer.

    This configuration helps you differentiate remote MSDP peers and manage the connections with the remote MSDP peers.

    • peer-address: specifies the IP address of a remote MSDP peer.

    • text: specifies the description text. The text is a string of a maximum of 80 characters.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055017

Views: 40729

Downloads: 97

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next